System Process Information - Qlogic SANbox 5000 Series Interface Manual

A
5.1.2

System Process Information

The Ps
what processes are running and CPU usage. The following example displays
current system processes.
SANbox #> ps
PID PPID %CPU
338 327
339 327
340 327
341 327
342 327
343 327
344 327
345 327
346 327
347 327
348 327
349 327
350 327
351 327
352 327
404 327
405 327
406 405
The column titles are as follows:
PID–Process identifier
PPID–Parent process identifier
%CPU–Percentage CPU usage
TIME–Actual processing time
ELAPSED–Elapsed time since the process started
COMMAND–The command that initiated the process.
59183-02 A
command displays system process information to help you determine
TIME ELAPSED COMMAND
0.0 00:00:00 3-01:18:35 cns
0.0 00:00:01 3-01:18:35 ens
0.0 00:00:21 3-01:18:35 dlog
0.1 00:05:35 3-01:18:35 ds
0.2 00:11:29 3-01:18:35 mgmtApp
0.0 00:00:04 3-01:18:35 fc2
0.0 00:02:16 3-01:18:35 nserver
0.0 00:02:44 3-01:18:35 mserver
0.8 00:35:12 3-01:18:35 util
0.0 00:00:29 3-01:18:35 snmpservicepath
0.0 00:02:46 3-01:18:34 eport
0.0 00:00:21 3-01:18:34 PortApp
5.6 04:08:24 3-01:18:34 port_mon
0.0 00:01:38 3-01:18:34 zoning
0.0 00:00:01 3-01:18:34 diagApp
0.0 00:00:04 3-01:18:27 snmpd
0.0 00:00:02 3-01:18:27 snmpmain
0.0 00:00:00 3-01:18:26 snmpmain
5 – Switch Configuration
Displaying Switch Information
5-3