Creating And Downloading A Log File - Qlogic SANbox 5000 Series Interface Manual
Fibre channel switch firmware version 6.8
Hide thumbs
Also See for SANbox 5000 Series:
- Interface manual (312 pages) ,
- Installation manual (130 pages) ,
- User manual (130 pages)
Table of Contents
Advertisement
11 – Event Log Configuration
Creating and Downloading a Log File
The
Set Setup System
LocalLogEnabled parameter and remote logging through the RemoteLogEnabled
and RemoteLogHostAddress parameters as shown in the following example:
SANbox (admin) #> set setup system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
EthNetworkDiscovery
EthNetworkAddress
EthNetworkMask
EthGatewayAddress
AdminTimeout
InactivityTimeout
LocalLogEnabled
RemoteLogEnabled
RemoteLogHostAddress
NTPClientEnabled
NTPServerAddress
EmbeddedGUIEnabled
11.6
Creating and Downloading a Log File
Enter the
the switch named logfile. This file can have a maximum of 1200 event messages.
Use FTP to download the file from the switch to your workstation as follows:
1.
Log into the switch through Telnet and create an archive of the event log.
The Set Log Archive command creates a file on the switch named logfile.
SANbox
SANbox (admin) #> set log archive
2.
Open an FTP session on the switch and log in with the account name
images and password images. Transfer the file logfile in binary mode with
the Get command.
>ftp ip_address
user:images
password: images
ftp>bin
ftp>get logfile
ftp>quit
11-6
command controls local logging through the
(1=Static, 2=Bootp, 3=Dhcp, 4=Rarp)
(dot-notated IP Address)
(dot-notated IP Address)
(dot-notated IP Address)
(dec value 0-1440 minutes, 0=never)
(dec value 0-1440 minutes, 0=never)
(True / False)
(True / False)
(dot-notated IP Address)
(True / False)
(dot-notated IP Address)
(True / False)
Set Log
Archive command to collect the event log messages in a file on
#> admin start
xxxxx bytes sent in xx secs.
S
[Static
]
[10.0.0.1
]
[255.255.255.0]
[10.0.0.254
]
[30
]
[0
]
[True
]
[False
]
[10.0.0.254
]
[False
]
[10.0.0.254
]
[True
]
59183-02 A
Advertisement
Table of Contents
