Filtering The Event Log Display; Controlling Messages In The Output Stream; Managing The Event Log Configuration - Qlogic SANbox 5000 Series Interface Manual

A
11.2.1

Filtering the Event Log Display

You can customize what events are displayed according to the component or
severity level. Enter the
display. You can choose from the following severity levels and component events:
Informative events
Warning events
Critical events
E_Port events
Management server events
Name server events
Port events
Switch management events
Simple Network Management Protocol (SNMP) events
Zoning events
The following example filters the event log display for critical events.
SANbox #> show log display critical
11.2.2

Controlling Messages in the Output Stream

Enter the
determine what messages are automatically displayed on the screen when they
occur. Alarms are always included in the output stream. The following example
includes warning and critical level messages in the output stream:
SANbox (admin) #> set log display warn
11.3

Managing the Event Log Configuration

Managing the Event Log Configuration consists of the following tasks:
Configure the Event Log
Display the Event Log Configuration
Restore the Event Log Configuration
59183-02 A
Show Log
Set Log Display command to specify the severity level filter to use to
11 – Event Log Configuration
Managing the Event Log Configuration
Display command to filter the events in the
11-3