Download Print this page

Qlogic 3000 Series Reference Manual page 84

Fibre channel event message fibre channel switch
Hide thumbs Also See for 3000 Series:

Advertisement

2–Event Messages
Warning Events
(W) (8B00.0010) (Will retry sending via SMTP server ip_address, port port_number)
Meaning:
(W) (8B00.0011) (SMTP addresses are defaults or disabled, will not retry sending
messages until a valid SMTP address has been configured and enabled)
Meaning:
(W) (8B00.0013) (Encountered failure communicating with SMTP server=ip_address,
port=port_number, Reason=reason, Description=description,
Response=response)
Meaning:
(W) (8B00.0015) (Profile profile, recipient email_address via SMTP server
ip_address/port_number, SMTP error: error)
Meaning:
(W) (8B00.0017) (CallHome message send for profile profile to recipient email_address
failed on SMTP server ip_address, port port_number. Retry will be attempted.)
Meaning:
(W) (8B00.0018) (CallHome message send for profile profile to recipient email_address
failed on SMTP server ip_address, port port_number. Retry failed, ignoring
recipient.)
Meaning:
2-70
After receiving a transient error from the Simple Mail Transfer
Protocol (SMTP) server on a e-mail message sent to a recipient,
the Call Home service will attempt to resend the e-mail message.
Either both Simple Mail Transfer Protocol (SMTP) server IP
addresses in the Call Home service configuration are the default
value (0.0.0.0), or they have not been enabled.
The Call Home Simple Mail Transfer Protocol (SMTP) client was
unable to establish communications with the specified SMTP
server. The Reason, Description, and Response fields describe the
error. If the error is a system call failure, the Description field
provides more detail. If the error was an SMTP server response
failure, the Response field provides more detail.
A Simple Mail Transfer Protocol (SMTP) error has occurred for the
given profile, recipient, server, and port.
The Call Home service failed to send an e-mail message to the
recipient in the named profile through the specified Simple Mail
Transfer Protocol (SMTP) server because of a transient error. The
Call Home service will attempt to resend the message.
The Call Home service attempt to resend an e-mail message to the
recipient in the named profile through the specified Simple Mail
Transfer Protocol (SMTP) server has failed. The Call Home service
will not attempt to resend the message.
59060-07 D

Advertisement

loading

This manual is also suitable for:

5000 series9000 series