Advertisement
HW_BAD_SEATING
Meaning:
HW_MP_ACCESS_CPU0
Meaning:
HW_MP_ACCESS_CPU1
Meaning:
HW_MP_DATA_MISMATCH
Meaning:
HW_POWERUP_FAIL
Meaning:
HW_SENSOR_FAULT
Meaning:
HW_UNSUPPORTED_BLADE
Meaning:
SENSOR_FAULT
Meaning:
temp_sensor_TEMP
Meaning:
voltage_sensor_HIGH
Meaning:
voltage_sensor_LOW
Meaning:
59060-07 D
Blade is improperly seated.
The maintenance panel SPROM data accessed through CPU0 is
either inaccessible or invalid.
The maintenance panel SPROM data accessed through CPU1 is
either inaccessible or invalid.
The maintenance panel SPROMs accessed through CPU0 and
CPU1 are not identical.
Blade never established initial communications.
Hardware temperature/voltage sensors are not functional.
Installed blade is unknown or not supported.
Power Supply blade reports an internal fault.
The temperature sensor reading is out of range; it is too high.
temp_sensor can be BOARD_0, BOARD, BOARD_1, DS1780_0,
DS1780, DS1780_1, MAX1617_0, MAX1617, ASIC_0, ASIC,
MAX1617_1, ASIC_1, or MEZZ_BOARD.
The voltage_sensor voltage supply is out of range; it is too high.
voltage_sensor can be 1.55V, 2.5V, 1.5V, ASIC_1.8V, 1.25V, 1.8V,
3.3V, CPU_1.8V, 5V, 12V, ASIC_0_1.5V, or ASIC_1_1.5V.
The voltage_sensor voltage supply is out of range; it is too low.
1.55V, 2.5V, 1.5V, ASIC_1.8V, 1.25V, 1.8V, 3.3V, CPU_1.8V, 5V,
12V, ASIC_0_1.5V, or ASIC_1_1.5V.
2–Event Messages
Fault Events
2-3
Advertisement
