(C) (8400.007E) (blade_id) (Blade fault (FW_APP_FAIL) processing in progress, gathering
support information...)
Meaning:
(C) (8400.007F) (blade_id) (Blade fault (FW_APP_FAIL) processing in progress, shutting
down ports...)
Meaning:
(C) (8400.0080) (Switch) (blade_ID) (Blade fault blade_fault processing in progress,
gathering support information...)
Meaning:
(C) (8400.008A) (A Zoning merge has occurred)
Meaning:
(C) (8400.0083) (blade_id) (Blade fault (FW_APP_FAIL) processing, pending graceful
re-route...)
Meaning:
(C) (8400.008D) (Illegal configuration detected based on licensing. Configuration will be
updated.)
Meaning:
(C) (8400.008E) (Inconsistent configuration defaults detected. Defaults will be updated.)
Meaning:
(C) (8400.008F) (Attempted speed licensed upgrade that is already enabled)
Meaning:
(C) (8400.0095) (The switch VWWN is being upgraded)
Meaning:
(C) (8400.0096) (Secondary CPU firmware update complete)
Meaning:
59060-07 D
There has been an internal application failure on the specified
blade.
There has been an internal application failure on the specified
blade - the ports are shutting down.
The system is gathering support information in response to the
blade fault that occurred on the specified blade.
Two fabrics have been connected and their zoning databases have
been merged.
There has been an internal application failure on the specified
blade
The restoration of a configuration backup has violated current
feature licensing. The active configuration will be automatically
updated based on current licensing.
Two fabrics have been connected, and their zoning databases
have been merged.
An attempt was made to install a license for a port speed that is
already operable on the switch.
The license upgrade was successful.
The update of the firmware image on the secondary CPU is
complete.
2–Event Messages
Critical Events
2-61