Qlogic SANbox 3810 Quick Start Manual
Fibre channel switch installation
Hide thumbs
Also See for SANbox 3810:
- Interface manual (396 pages) ,
- User manual (142 pages) ,
- Installation manual (92 pages)
Related Manuals for Qlogic SANbox 3810
Summary of Contents for Qlogic SANbox 3810
-
Page 1: Quick Start Guide
Quick Start Guide F I B R E C H A N N E L S W I T C H I N S T A L L A T I O N S A N b o x 3 8 1 0 ®... -
Page 2: Installation Instructions
SANbox 3000/5000 series rail kit and the switch in a standard 19" rack as described in the SANbox 3000/5000 Series Fibre Channel Switch Rack Mounting Guide. Step 3. Install Transceivers An SFP transceiver is required for each SFP port that will be connected to a device. The SANbox 3810 switch SFP ports support 2-Gbps, 4-Gbps, and 8-Gbps transmission. ❑... - Page 3 Open an Internet browser and start a new QuickTools session. Enter the new IP address to log in to switch. Step 9. Connect Devices ❑ Connect fiber optic cables between the installed transceivers and their corresponding devices. Each port auto-negotiates the proper port type with the connected device. Congratulations You have successfully installed your QLogic SANbox 3810 Switch...
- Page 4 Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration for assistance. QLogic Technical Support can be reached by the following methods: Web: http://support.qlogic.com E-mail: support@qlogic.com The QLogic knowledge database contains troubleshooting information for the QLogic HBAs. Access the data base from the QLogic Support Web page, http://support.qlogic.com.