Download Print this page

Qlogic 3000 Series Reference Manual page 77

Fibre channel event message fibre channel switch
Hide thumbs Also See for 3000 Series:

Advertisement

(C) (8600.0018) (PortApp) (External port license became available, re-starting downed
external ports)
Meaning:
(C) (8600.0019) (PortApp) (Internal port license count exceeded, downing internal port
port_number)
Meaning:
(C) (8600.001A) (PortApp) (Internal port license became available, re-starting downed
internal ports)
Meaning:
(C) (8600.001B) (RX Seq Error D_ID sequence_destination S_ID sequence_source SEQ_ID
sequence_ID OX_ID originator_exchange RX_ID recipient_exchange CMPLT
complete_status NFRAMES frame_count)
Meaning:
(C) (8700.0007) (EPort) (Port: port_number) (Received frame from address not in Access
Control List (ACL) hard zone (src address = FC_address, dest address =
FC_address))
Meaning:
(C) (8700.000D) (EPort) (Port: port_number) (Resetting Inter-Switch Link (ISL), a time out
value has been reconfigured.)
Meaning:
(C) (8700.000E) (EPort) (Port: port_number) (InteropCredit value was reconfigured,
resetting port.)
Meaning:
(C) (8700.000F) (EPort) (Port: port_number) (Broadcast frame received & broadcast
disabled, discarding broadcast frames.)
Meaning:
59060-07 D
An external port that was previously down because of insufficient
port licenses is now online.
A device attempted to login to an internal port, but a license was
not available. A license upgrade may be required, or a license may
be released by downing ports.
A license has become available and ports that had been previously
downed to due to unavailable licenses will be restarted.
An error was encountered while handling the receive sequence
referenced in the log message. Contact your authorized
maintenance provider.
The destination for the receive frame is in an ACL zone and the
source is not. The frame will not be forwarded.
The Resource Allocation (R_A_TOV) or Error Detect (E_D_TOV)
timeout value has been reconfigured. E_Ports will be automatically
reset to inform the neighbor switch of the change.
The InteropCredit parameter has changed. The affected port will
be automatically reset.
Broadcast is disabled and the switch has received a broadcast
frame. Enable broadcast to receive broadcast frames.
2–Event Messages
Critical Events
2-63

Advertisement

loading

This manual is also suitable for:

5000 series9000 series