Advertisement
(A1007.002D) (Ignoring RADIUS Server RADIUS_server, invalid UDP port configured)
Meaning:
Action:
(A1007.002E) (Ignoring RADIUS Server RADIUS_server, zero timeout configured)
Meaning:
Action:
(A1007.002F) (Ignoring RADIUS Server RADIUS_server, no shared secret is configured)
Meaning:
Action:
(A1007.0030) (Security protocol not using chap, unable to authenticate.)
Meaning:
Action:
(A1007.0031) (Security protocol not using chap, unable to authenticate.)
Meaning:
Action:
59060-07 D
A Remote Authentication Dial In Service (RADIUS) server was
configured with invalid data for the User Datagram Protocol (UDP)
port. This configuration field is required to use the RADIUS server.
Set the UDP port value in the switch RADIUS server configuration
using the Set Setup Radius command.
A Remote Authentication Dial In Service (RADIUS) server was
configured with invalid data for the timeout value. A valid time out
value is required to use the RADIUS server.
Set the timeout value in the switch RADIUS server configuration.
using the Set Setup Radius command.
A Remote Authentication Dial In Service (RADIUS) server was
configured with invalid data for the shared secret. A valid time out
value is required to use the RADIUS server.
Set the shared secret in the switch RADIUS server configuration.
using the Set Setup Radius command.
A Challenge Handshake Authentication Protocol (CHAP) negotiate
frame was received that specifies an unsupported Diffie-Helmann
(DH) group type.
Check the remote device for a possible error condition. Reset the
port. If errors continue, disable CHAP for this device if it belongs in
the fabric.
A Challenge Handshake Authentication Protocol (CHAP) negotiate
frame was received that specified an unsupported hashing
algorithm or an algorithm that is not allowed for this security
member's configuration.
Check the remote device for a possible error condition. Reset the
port. If errors continue, disable CHAP for this device if it belongs in
the fabric.
2–Event Messages
Alarm Events
2-43
Advertisement
