Advertisement
2–Event Messages
Critical Events
(C) (8400.006A) (Switch) (Upgrading License for Fabric Security)
Meaning:
(C) (8400.006B) (Switch) (Upgrading License for CLI Extended Credits capability)
Meaning:
(C) (8400.0070) (blade_ID blade is operational)
Meaning:
(C) (8400.0071) (Extraction latch was opened)
Meaning:
(C) (8400.0072) (Extraction latch was closed)
Meaning:
(C) (8400.0073) (Blade was powered off)
Meaning:
(C) (8400.0074) (Blade was powered on)
Meaning:
(C) (8400.0075) (Upgrading License for Fault Tolerant capability)
Meaning:
(C) (8400.0076) (Upgrading License for HyperStack(tm) capability)
Meaning:
(C) (8400.0079) (Canceling config edit mode as a result of a CPU switchover)
Meaning:
(C) (8400.007A) (Resaving the zoning config as a result of a CPU switchover)
Meaning:
(C) (8400.007B) (Resaving the security config as a result of a CPU switchover)
Meaning:
(C) (8400.007C) (CPUn) (Switching over to Secondary blade_ID)
Meaning:
2-60
The Fabric Security Bundle license was applied successfully.
The CLI Extended Credits license was applied successfully.
The specified blade is powered on and fully operational.
The latch has been pulled down. The blade is not accessible.
The latch has been closed. The blade is inserted into the chassis.
The blade is powered off after a latch pull.
The blade was powered on after an extraction latch was closed.
The Fault Tolerant license was applied successfully.
The HyperStack license was applied successfully.
A CPU blade switchover occurred while a Config Edit session was
open.
A CPU blade switchover occurred while saving the configured
zoning database. A save 'retry' is occurring.
A CPU blade switchover occurred while saving the security
database. A save 'retry' will now occur.
Control is transferring from the primary CPU to the specified
secondary CPU blade.
59060-07 D
Advertisement
