Download Print this page

Qlogic 3000 Series Reference Manual page 71

Fibre channel event message fibre channel switch
Hide thumbs Also See for 3000 Series:

Advertisement

(C) (8400.0044) (Switch) (A reset is required since a Power On Self Test (POST) has never
run on these ports)
Meaning:
(C) (8400.0045) (Switch) (Upgrading License for 4G capability)
Meaning:
(C) (8400.0046) (Switch) (Upgrading License for multiple ISL capability)
Meaning:
(C) (8400.0047) (Switch) (New licenses are being installed
Meaning:
(C) (8400.0049) (Switch) (The Configuration Wizard from ip_address is exiting - switch
configuration may have changed)
Meaning:
(C) (8400.004B) (Switch) (Attempted to license modes on an unsupported switch type)
Meaning:
(C) (8400.004C) (Switch) (Services setup is changing - may lose connection - admin being
released automatically)
Meaning:
(C) (8400.004D) (Switch) (ntpdate: no server suitable for synchronization found)
Meaning:
(C) (8400.004E) (Switch) (ntpdate: synchronization lost)
Meaning:
(C) (8400.0050) (Switch) (Upgrading License allowing manufacturing setup mode
capability)
Meaning:
(C) (8400.0052) (Switch) (Upgrading License for EFCM capability)
Meaning:
59060-07 D
After upgrading ports, it may be necessary to reset the switch so
that the POST can run on the newly licensed ports.
Installation of the license key that grants 4-Gbps transmission
speed capability to the Fibre Channel ports is in progress.
The switch has been upgraded to allow for multiple inter-switch
links.
New licenses are being installed.
Changes made to switch may result in loss of communication with
the switch.
An attempt was made to install a license key for a feature that is
not supported on the switch.
The Services configuration is changing and this may result in the
loss of a connection.
The Network Time Protocol (NTP) server was not found.
The Network Time Protocol (NTP) server synchronization was lost.
The license upgrade was successful.
The license upgrade was successful.
2–Event Messages
Critical Events
2-57

Advertisement

loading

This manual is also suitable for:

5000 series9000 series