Download Print this page

Qlogic 3000 Series Reference Manual page 79

Fibre channel event message fibre channel switch
Hide thumbs Also See for 3000 Series:

Advertisement

(C) (8B00.000A) (Unable to provide profile processing information, the CallHome service
is updating configuration)
Meaning:
(C) (8B00.000B) (Unable to change SMTP servers because the CallHome service is
updating configuration)
Meaning:
(C) (8B00.000C) (FromEmailAddress has not been configured in the CallHome setup.
Messages cannot be sent to the SMTP server until this condition is
corrected.)
Meaning:
(C) (8B00.0012) (Critical protocol failure with SMTP server)
Meaning:
(C) (8B00.0014) (Successful recovery of SMTP communications)
Meaning:
(C) (8B00.0016) (SMTP server ip_address, port port_number, did not accept any recipients
from profile profile. Email message will not be sent for this profile.)
Meaning:
(C) (8F00.000C) Fabric Status
Meaning:
(C) (8F00.000D) Switch Status
Meaning:
59060-07 D
Profile status information is not available while the Call Home
service configuration is being updated.
You cannot change the active Simple Mail Transfer Protocol
(SMTP) server while updating the Call Home service configuration.
The FromEmailAddress must be specified in the Call Home service
configuration. This e-mail address will receive notifications from the
Simple Mail Transfer Protocol (SMTP) servers concerning e-mail
messages that could not be delivered.
Communications have failed, or an unrecoverable Simple Mail
Transfer Protocol (SMTP) protocol error has occurred on the active
SMTP server.
Communications have been re-established with one of the Simple
Mail Transfer Protocol (SMTP) servers following a communications
failure.
The Simple Mail Transfer Protocol (SMTP) server does not
recognize or could not resolve any of the recipient e-mail
addresses listed for the profile.
status
The severity level of the fabric status has changed. The description
field will show the reason for fabric status.
status
The severity level of the switch status has changed. The
description field will show the reason for the switch status.
2–Event Messages
Critical Events
2-65

Advertisement

loading

This manual is also suitable for:

5000 series9000 series