Advertisement
(A1005.0082) (Blade fault (FW_APP_FAIL) - Internal application failure)
Meaning:
Action:
(A1005.008E) (Blade fault (FW_APP_PEER_FAULT) - Application declared error
communicating with another CPU)
Meaning:
Action:
(A1005.0096) (blade_id) (Blade fault (HW_MP_ACCESS_CPUx) - The MP SPROM data
accessed via CPUx is either inaccessible or invalid)
Meaning:
Action:
(A1005.009B) (IPSec configuration error: error_description)
Meaning:
Action:
(A1005.009C) (IPSec configuration error: Association assocation_name : error_description
Meaning:
Action:
(A1005.009D) (IPSec configuration error: Policy policy_name : reason)
Meaning:
Action:
(A1005.0101) (ipv6: duplicate address detected)
Meaning:
Action:
59060-07 D
Internal application failure.
Contact your authorized maintenance provider.
An application declared an error communicating with other CPU.
Contact your authorized maintenance provider.
The maintenance panel SPROM data accessed through the
specified CPU blade is either inaccessible or invalid.
Contact your authorized maintenance provider.
An error occurred while saving changes to an IP Security
configuration. None of the configuration modifications have been
applied to the switch's active database.
Resolve any other IP Security alarms. If this alarm persists, contact
your authorized maintenance provider.
An error occurred affecting the specified association while saving
the IP Security configuration. The association has not been applied
to the active database.
Redo modifications to the association and save it.
An error occurred affecting the specified policy while saving the IP
Security configuration. The policy has not been applied to the
active database.
Redo modifications to the policy and save it.
Another IP version 6 system on the local network is using the same
address as this switch.
If the discovery method is static, assign a different IP version 6
address, or disconnect the device that is using the same address.
2–Event Messages
Alarm Events
2-31
Advertisement
