Download Print this page

Qlogic 3000 Series Reference Manual page 24

Fibre channel event message fibre channel switch
Hide thumbs Also See for 3000 Series:

Advertisement

2–Event Messages
Alarm Events
(A1003.0038) (Merge failed, Total zones in zonesets limit would be exceeded.)
Meaning:
Action:
(A1003.0039) (Merge failed, total zone limit would be exceeded.)
Meaning:
Action:
(A1003.003A) (Zone Merge conflict for ZoneSet zone_set_name (Zone mismatch for zone=
zone_name, check type or members), ISOLATING)
Meaning:
Action:
(A1003.003B) (Incomplete merge request sequence received, unable to process request.)
Meaning:
Action:
(A1003.003C) (Incompatible Zoning mode, Isolating link)
Meaning:
Action:
(A1003.003E) (Security: Ports downed for INVALID_ATTACH require administrative action
to be brought online.)
Meaning:
Action:
(A1003.003F) (ISL group empty and links up. Set ports offline to activate.)
Meaning:
Action:
2-10
A fabric merge failed because the total number of zones in zone
sets exceeds the zoning database limit.
Remove zones either from the local switch or the remote switch so
that the combined sum is less than the zones-in-zone sets limit.
A fabric merge failed because the total number of zones exceeds
the zoning database limit.
Remove zones either from the local switch or the remote switch so
that the combined sum is less than maximum zone limit.
A fabric merge failed because two zones of the same name in two
zone sets of the same name have different membership.
Reconcile the membership in the two zones so that they are the
same.
A remote switch sent a merge request that was not understood.
Check the remote switch for configuration errors or equipment
malfunction.
The fabric contains switches with a mix of interoperability mode
settings.
Configure all switches in the fabric to have the same value for
interoperability mode.
When deactivating a security set, ports that were previously
downed due to security violations remain down.
Reset the ports or place the ports online.
An attempt to activate fabric binding with an ISL group that has no
members is not allowed because there are inter-switch links (ISL)
logged in to the switch.
Configure all ISLs offline or add each ISL member with fabric
binding information to the ISL group before activating.
59060-07 D

Advertisement

loading

This manual is also suitable for:

5000 series9000 series