Download Print this page

Qlogic 3000 Series Reference Manual page 73

Fibre channel event message fibre channel switch
Hide thumbs Also See for 3000 Series:

Advertisement

(C) (8400.0061) (Switch) (Warning-Illegal transparent mode configuration, Either the
primary or backup map for port port_number was set to a port whose type is
not TF. The mapping for this port has been cleared.
Meaning:
(C) (8400.0062) (Switch) (New firmware has been installed.)
Meaning:
(C) (8400.0065) (Switch) (The switch is being automatically hardreset after leaving the
Diagnostics AdminState.)
Meaning:
(C) (8400.0066) (Switch) (IOn) (Blade is being automatically hardreset after leaving the
Diagnostics AdminState.)
Meaning:
(C) (8400.0067) (Switch) (The switch is entering Diagnostics AdminState and will
automatically hardreset and have the configured AdminState when leaving
the Diagnostics AdminState.)
Meaning:
(C) (8400.0068) (Switch) (IOn) (Blade is entering Diagnostics AdminState and will
automatically hardreset and have the configured AdminState when leaving
the Diagnostics AdminState.)
Meaning:
(C) (8400.0069) (Switch) (Warning-When leaving the Diagnostics AdminState of the
primary CPU blade, an automatic reset of the blade will occur. The blade and
the switch will come back up in the configured AdminState.)
Meaning:
59060-07 D
An attempt was made to map a TH port to a port that was not of
type TF.
New firmware was successfully installed.
The switch automatically undergoes a hard reset after leaving the
Diagnostics administrative state.
I/O blade is undergoing a hard reset after leaving the Diagnostics
administrative state.
The switch is entering the Diagnostics state and will automatically
undergo a hard reset. The switch will return to the configured
administrative state after leaving the Diagnostics administrative
state.
The I/O blade is entering Diagnostics state and will automatically
undergo a hard reset. The I/O blade will return to the configured
administrative state after leaving the Diagnostics administrative
state.
The primary CPU blade is entering Diagnostics state and will
automatically undergo a hard reset. The I/O blade will return to the
configured administrative state after leaving the Diagnostics
administrative state.
2–Event Messages
Critical Events
2-59

Advertisement

loading

This manual is also suitable for:

5000 series9000 series