Advertisement
In the CLI, each message has the following format:
[ordinal][time_stamp][severity][source][message_ID][message_text]
Component
[ordinal]
[time_stamp]
[severity]
[source]
[message_ID]
[message_text]
Here is a sample of an informative-level message from the Switch source:
[1][Wed May 26 12:30:29.965 UTC 2004][I][8400.0022][Switch][Successful login user
(snmp@IB-session6) with admin privilege]
For more information about the CLI commands, refer to the Command Line
Interface Guide for your switch.
59060-07 D
Displaying the Events Using the Command Line Interface
Table 1-2. Event Log Message Format
A number assigned to each message in sequence since that last
time the alarm history was cleared.
The time the alarm was issued in the format
day-month-hh:mm:ss:ms-yyyy. This time stamp comes from the
switch for events that originate with the switch, and from the
workstation for events that originate from Enterprise Fabric
Suite.
The event severity: A–Alarm, C–Critical, W–Warning, I–Informa-
tive.
The program module or application that generated the event.
Sources include Zoning, Switch, PortApp, EPort, Management
Server. Alarms do not include the source.
A number that identifies the message using the following format:
category.message_number
The alarm message text
1–Events and Event Logging
Description
1-3
Advertisement
