Advertisement
(A1005.011A) (DCBX_PEER_FEATURE_ERROR error: Policy policy_name : reason)
Meaning:
Action:
(A1005.011C) (DCBX_LINK_DOWNED error: Policy policy_name : reason)
Meaning:
Action:
(A1005.011D) (DCBX_NO_PER_PRIORITY_FLOW_CONTROL error: Policy policy_name :
reason)
Meaning:
Action:
(A1005.011E) (DCBX_MULTI_PER_PRIORITY_FLOW_CONTROL error: Policy policy_name :
reason)
Meaning:
Action:
(A1005.011F) (ENODE_MAC_NOT_CONFIGURED_IN_VLAN error: Policy policy_name :
reason)
Meaning:
Action:
(A1005.0120) (PT_ADJACENT_SERDES_NOTIFICATION error: Policy policy_name : reason)
Meaning:
Action:
59060-07 D
Peer on link has detected an error during DCBX [Priority
Group|Priority Flow Control] exchange.
An error has occurred during the configuration exchange of the
specified feature. The local and remote configurations are
incompatible.
The link has been downed by the DCBX protocol.
Consult additional alarms or logs for further information.
Peer specified no DCBX Priority Flow Control priority for FCoE
traffic.
The peer Priority Flow Control feature TLV contained no enabled
priority values. DCBX cannot enable the link until a priority value is
enabled.
Peer specified multiple DCBX Priority Flow Control priorities ([list of
values]).
The peer Priority Flow Control feature TLV contained multiple
enabled priority values. Only a single value is expected. DCBX
cannot enable the link until a single priority value is enabled.
An enode mac was not configured in list, not responding to FIP
request from host.
Configure enode mac within the enode mac list, or configure
RequireEnodeMacConfig to false so that Enode mac's are not
required to be configured.
Port not configured as PT being downed due to sharing hardware
SerDes with PT port.
Configure port as PT port type if desired to run.
2–Event Messages
Alarm Events
2-35
Advertisement
