Advertisement
2–Event Messages
Alarm Events
(A1005.000E) (Configuration error, can't extend credit on loop capable ports. Extended
credit not granted for port: port_number)
Meaning:
Action:
(A1005.0013) (Hotswap procedure failed - must hardreset switch)
Meaning:
Action:
(A1005.0020) (Warning - development logging is enabled)
Meaning:
Action:
(A1005.0024) (Switch must be reset after leaving the Diagnostics Admin State)
Meaning:
Action:
(A1005.0034) (System resource error - contact technical support)
Meaning:
Action:
(A1005.0035) (System resource error - contact technical support)
Meaning:
Action:
(A1005.0036) (Hotswap procedure failed before last reset - must hardreset switch)
Meaning:
Meaning:
(A1005.0037) (Hotswap procedure never completed - the blade will not be functional until
the switch is hardreset)
Meaning:
Action:
(A1005.0038) (Switch incompatibility error - contact technical support)
Meaning:
Action:
2-22
Loop ports cannot borrow credits from the credit pool.
Change the port type to G_Port or F_Port.
The blade hot-swap procedure failed or the procedure was not
followed correctly.
Perform a hard reset.
Development logging is enabled.
Contact your authorized maintenance provider.
After changing the switch administrative state from Diagnostics to
any other state, the switch must be reset to complete the state
change.
Reset the switch.
There is a system resources problem on the switch.
Contact technical support.
There is an internal problem on the switch.
Contact technical support.
The blade hotswap procedure failed and the switch was reset
without a power-on self test.
Reset the switch with a hard reset.
The blade hot-swap procedure was not completed.
Reset the switch with a hard reset.
Switch incompatibility error.
Contact technical support.
59060-07 D
Advertisement
