Download Print this page

Qlogic 3000 Series Reference Manual page 48

Fibre channel event message fibre channel switch
Hide thumbs Also See for 3000 Series:

Advertisement

2–Event Messages
Alarm Events
(A1005.0113) (TR Port removing Proxy for port_wwn logged in at FC-ID fc_id, duplicate
port name logged in at FC-ID fc_id)
Meaning:
Action:
(A1005.0115) (DCBX_TOO_MANY_NEIGHBORS error: Policy policy_name : reason)
Meaning:
Action:
(A1005.0116) (DCBX_NEIGHBOR_LOST error: Policy policy_name : reason)
Meaning:
Action:
(A1005.0117) (DCBX_PEER_UNADVERTISED error: Policy policy_name : reason)
Meaning:
Action:
A1005.0118) (DCBX_PEER_UNADVERTISED error: Policy policy_name : reason)
Meaning:
Action:
A1005.0019) (DCBX_PEER_FEATURE_DISABLED error: Policy policy_name : reason)
Meaning:
Action:
2-34
A device is logged in on another switch in the local fabric with the
same port WWN as a proxy for a device in a remote fabric. The
proxy created on the local switch has been removed.
Examine the adapters with the given WWN and determine which is
using the incorrect world wide name.
LLDP found too many neighbors on link, DCBX is disabled.
DCBX is expected to run operate over a point to point link. LLDP
has detected multiple neighbors, so DCBX will operate as if no
DCBX peers are present until the condition is no longer present.
LLDP found no neighbors on link, DCBX is disabled.
No LLDP neighbor has been detected on the link, or an existing
neighbor has been aged out and removed. DCBX cannot enable
the link until neighbor information is refreshed.
LLDP neighbor on link is not sending DCBX TLVs
An LLDP neighbor is present on the link, but the LLDP PDU does
not contain any DCBX TLVs. DCBX cannot enable the link until
neighbor information is refreshed.
Peer on link has not enabled the DCBX [Priority Group|Priority
Flow Control] feature.
An LLDP neighbor is present on the link, and the LLDP PDU
contains DCBX TLVs, but the specified feature is not advertised by
the peer. DCBX cannot enable the link until the feature is present.
Peer on link has not enabled the [Priority Group|Priority Flow
Control] feature.
An LLDP neighbor is present on the link, and the LLDP PDU
contains DCBX TLVs for the specified feature, but the feature is not
enabled by the peer. DCBX cannot enable the link until the feature
is present.
59060-07 D

Advertisement

loading

This manual is also suitable for:

5000 series9000 series