Advertisement
2–Event Messages
Alarm Events
(A1007.0029) (Security protocol not using chap, unable to authenticate.)
Meaning:
Action:
(A1007.002A) (Inconsistent Fabric Binding configuration. Enabled on remote switch(s),
disabled on local switch.
Meaning:
Action:
(A1007.002B) (Security: Chap session Negotiate Authentication failed)
Meaning:
Action:
(A1007.002C) (Security: Authentication protocol msg (AUTH_DONE) inconsistent with
Authentication protocol in progress)
Meaning:
Action:
2-42
A Challenge Handshake Authentication Protocol (CHAP) negotiate
frame that specifies an unsupported authentication protocol was
received.
Check the remote device for a possible error condition. Reset the
port to try again. If errors continue, disable CHAP for this device if
the device belongs in the fabric.
Inconsistent fabric binding configuration settings between local and
remote switch. All switches in the fabric must have the same
configured fabric binding setting.
Enable or disable fabric binding on all switches.
The local switch received an authentication negotiate frame which
failed processing. Either the payload of the frame did not match the
standard layout of the frame or the Challenge Handshake
Authentication Protocol (CHAP) session between the devices
being authenticated was not in the state where the negotiate frame
was expected.
Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable Challenge Handshake
Authentication Protocol (CHAP) for this device if it belongs in the
fabric.
The local switch received an AUTH_DONE command
authentication frame while the Challenge Handshake
Authentication Protocol (CHAP) session was not in the correct
state to expect this type of frame. The remote device is not
following standard authentication protocol.
Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable CHAP for this device
if the device belongs in the fabric.
59060-07 D
Advertisement
