Selecting A Main Mode - Fluke 91 Series II User Manual

Using the Dual Display Mode Functions

SELECTING A MAIN MODE

At power-on, the main menu at the bottom of the display is
always shown. To get the main menu from another menu or
screen, press .
Main menu
Choose a main mode with any of the function keys:
, , , , or
The measuring result is then displayed.
INPUT A and INPUT B
measure the signal waveforms. You can set the amplitude
of both waveforms, time base speed, and triggering for an
optimum trace display. See Chapter 5 for more information
about SCOPE mode.
Signals supplied to INPUT A are measured.
Two measurement results appear initially on the display in
a 3 2/3-digit numeric display. At the same time you find the
graphic representation of the waveform in the lower display.
.
91 are used to
You can select the type and number of readings in the
MORE METER window; press
window.
4 - 3
and to open the