4 - 14
A typical scaling display is shown in the figure below:
91/92/96/99/105
Stop Scaling
To stop scaling do one of the following:
•
Choose another function.
Highlight SCALE READING in the More window, press
•
, highlight "off", and press
Readings Relative to a Minimum or Maximum Value
(Min Max Zero ∆)
Min Max Zero ∆ views the relative readings in units appro-
priate for the function and range selected. When in Min
Max recording mode, set the test tool as follows:
1. From a Submenu, press
Now the reading relative to the main value appears on the
display.
In this example the Meter Min Max Zero is used.
Users Manual
.
(ZERO ∆).
NOTE