Reading The Display; Rs-232 Optical Interface Connection - Fluke 91 Series II User Manual

1 - 8

RS-232 Optical Interface Connection

The Optically Isolated RS-232 Adapter/Cable (PM9080) can
be connected to the test tool for printer output and computer
interface. Using the FlukeView software for DOS and
Windows adds the following functionality to your
ScopeMeter test tool:
Storing of measurements in memory for later retrieval.
•
• Comparing of measurements with reference examples.
Storing, analyzing, and documenting measurements.
•
The following table shows the printing and communication
features for each model:
Screen dump using FlukeView
Direct output to printer
Remote control via computer software

READING THE DISPLAY

The display provides a great deal of information. The major
part of the display is always devoted to meter readings or
the scope waveform. A Dual display appears in
, , and modes, and is divided into two areas:
Main display and Bottom display. A Scope display appears
in mode, and is divided into three areas: Top
display, Main display, and Bottom display.
Refer to Figure 1-4 during the following discussions.
91 92 96 99 105
,
91/92/96/99/105
Figure 1-4 ScopeMeter Test Tool Display
Users Manual