Quick Measurement Demonstration - Fluke 91 Series II User Manual

Getting Started
1. +
2.
Perform a Reset at Power ON.
At power-on, all five function key definitions in the bottom display are assigned to the Main
menu. Notice that METER is highlighted.
Ensure the probe range is 10:1, as indicated on the display.
The screen displays about "03.43 Vrms AC" and "+02.15 V DC" in large numbers, and
34.44 Hz in smaller numbers. (The values can vary depending on the condition of the Demo
Board battery.) An additional scope trace gives a graphical representation of the waveform.
Open the Measure menu; the five function keys now are assigned to: MORE MEASURE, V,
Hz, dB, or TIME.
QUICK MEASUREMENTS DEMONSTRATION
2 - 7
Continued on next page