1 - 4
POWERING THE SCOPEMETER TEST TOOL
The test tool can be powered from any of the following
sources. Refer to Figure 1-2.
•
Internal Battery Pack (PM9086)
A rechargeable NiCad Battery Pack comes installed in
every test tool.
•
C Cell Batteries
You can use four alkaline batteries in place of the
NiCad Battery Pack. (The charger is defeated when
standard C cells are installed).
•
Power Adapter (PM8907)
The Power Adapter/Battery Charger powers the test
tool from a standard ac outlet. The test tool can be used
during battery charging. Verify that your local line
voltage is appropriate before using the Power
Adapter/Battery Charger to power the test tool and/or
charge the battery pack.
See Appendix 10C for more information.
Automotive Adapter (PM9087, optional)
•
The Automotive Adapter powers and charges from a
standard 12V dc automotive accessory (lighter) outlet.
Refer to Chapter 9 for battery replacement instructions.
91/92/96/99/105
Figure 1-2 Power Connections
Users Manual
EXTERNAL
POWER
SOCKET