Using the Scope Mode
ADJUSTING THE TIME BASE
Press
to increase or decrease the number of
periods. The time base readout is on the second row of the
top display. Refer to Figure 5-3. Available settings depend
on the acquisition mode in effect, and are as follows:
•
Recurrent
5ns (10ns)/DIV - 1s/DIV
•
Single
100ns/DIV - 1s/DIV
Roll
2s/DIV - 60s/DIV
•
Fluke 91, 92, 96 and 99 : 10ns/DIV
*
Fluke 105 :
The time base can be changed in increments of 1, 2, and 5
(e.g., 10 ns, 20 ns, 50 ns).
*
5ns/DIV
Figure 5-3 Time Base and Amplitude Adjustment
5 - 5