Recalling A Setup Configuration - Fluke 91 Series II User Manual

6 - 10
To reposition any of the recalled waveforms on the display,
first select the appropriate waveform separately by
pressing , highlight "move #" in the list box with
and , and press
the right bottom of the display. Now use
reposition the waveform.
Press (CLEAR WAVEFORM) to remove all recalled
waveforms from the display. The live waveforms (A, B, and
A±B) remain displayed, and the present setup configuration
will not change.

Recalling a Setup Configuration

Press (RECALL SETUP) to recall a saved setup
•
configuration from setup memory. A list of all used
setup memories now appears.
• Use or to highlight the required setup.
• Press to recall the selected setup, that replaces
the present setup configuration.
to select. appears in
and to
91/92/96/99/105 Users Manual