2 - 2
91/92/96/99/105
Users Manual
This chapter provides a 15-minute demonstration intended
for those who are not familiar with the ScopeMeter test tool.
It gives some hands-on experience, with an emphasis on
learning by seeing and doing. Those who are familiar with
the test tool can skip the following pages and continue to
Chapter 3.
Press
to turn on the test tool.
•
Operation begins in the last-known configuration. Factory
default settings are used at the first power-on. Subsequent
power-ons maintain configuration changes made with
keystrokes or through recall of a setup memory during the
previous session.