ScopeMeter Test Tool Tutorial
Averaging can be used to remove this random noise from
the waveform. The function will average a number of
acquisitions and smooth out the random noise.
To use Average:
17. Press
to disable Min Max envelope.
18. Press
.
19. Use
to highlight "scope average", and
press
to select.
20. Use
to achieve an average factor of 32.
You should now have a noise-free trace on the display as
shown in Figure 8-17.
Note that Averaging slows down the waveform response.
Don't forget to deactivate it if not required; otherwise, the
display will appear sluggish.
21. Use
to set Average to OFF
Figure 8-17 Averaging a Waveform
8 - 25