Fluke 91 Series II User Manual page 64

4 - 4
If necessary, you can select the range of both the scope
trace and meter display, and the time base speed.
Press to select the desired attenuation.
•
Ranges are from 1V to 3 kV (Vrms: 2.5 kV) with 10:1
probe, or from 100 mV to 300V (Vrms: 250V) with direct
1:1 input.
Press to select the desired time base; ranges
•
are from 1 µs to 100 ms/div.
Resistance mode. A resistor connected to the red
and black 4-mm banana jack inputs is measured. The red
banana jack is the high input, and the black banana jack
(COM) is the low. The time base is fixed at 5 ms/DIV.
In the diode and resistance modes, the black COMmon
banana jack is not connected internally to the common of
BNC INPUTS A and B.
NOTE
91/92/96/99/105 Users Manual