Fluke 91 Series II User Manual page 11

X
DO THE FOLLOWING TO AVOID ELECTRICAL SHOCK
IF A SCOPEMETER TEST TOOL
INPUT IS CONNECTED TO >42V PEAK (30V RMS):
1. USE ONLY THE TEST LEAD/PROBE SET SUPPLIED
WITH THE SCOPEMETER
SAFETY-DESIGNED
EXPOSED METAL CONNECTORS).
2. DO NOT USE CONVENTIONAL EXPOSED METAL
BNC OR BANANA PLUG CONNECTORS IF THE
COM (COMMON) IS >42V PEAK (30V RMS).
3. USE ONLY ONE COM (COMMON) CONNECTION
(THE 4-MM BLACK BANANA JACK).
4. REMOVE ALL PROBES AND TEST LEADS THAT
ARE NOT IN USE.
5. USE 600V RATED PROBE TIP ADAPTERS.
"600V" IS PRINTED ON EQUIPMENT SO RATED.
6. CONNECT THE PM8907 POWER ADAPTER TO THE
WARNING
COM (COMMON)
TEST TOOL
EQUIVALENTS WITHOUT
AC OUTLET BEFORE CONNECTION TO THE
SCOPEMETER TEST TOOL.
(OR
91/92/96/99/105 Users Manual