Pim-Sm Configuration Example; Rendezvous Point - Extreme Networks ExtremeWare XOS Guide Manual
Concepts guide
Hide thumbs
Also See for ExtremeWare XOS Guide:
- Command reference manual (2024 pages) ,
- Manual (698 pages) ,
- Manual (256 pages)
Table of Contents
Advertisement
IP Multicast Routing
The router labeled IR1 has the following configuration:
configure vlan HQ_10_0_1 ipaddress 10.0.1.2 255.255.255.0
configure vlan HQ_10_0_2 ipaddress 10.0.2.2 255.255.255.0
configure ospf add vlan all area 0.0.0.0
enable ipforwarding
enable ospf
enable ipmcforwarding
configure pim add vlan all dense
enable pim
PIM-SM Configuration Example
In
Figure
66, the system labeled ABR1 is configured for IP multicast routing using PIM-SM.
Figure 66: IP multicast routing using PIM-SM configuration example
Area 0
IR 2
Headquarters
ABR 2
160.26.25.1
Virtual link
160.26.25.2
Area 5
The router labeled ABR1 has the following configuration:
configure vlan HQ_10_0_2 ipaddress 10.0.2.1 255.255.255.0
configure vlan HQ_10_0_3 ipaddress 10.0.3.1 255.255.255.0
ExtremeWare XOS 11.1 Concepts Guide
10.0.1.1
10.0.3.2
ABR 1
10.0.3.1
160.26.26.1
160.26.26.2
Chicago
IR 1
10.0.1.2
10.0.2.2
10.0.2.1
Rendezvous
point
161.48.2.2
Los Angeles
161.48.2.1
Area 6 (stub)
EX_062
414
Advertisement
Table of Contents
