Configuring Slots and Ports on a Switch
.
5:106
VR-Default
5:107
VR-Default
5:108
VR-Default
================================================================================
Link Status: A-Active R-Ready
Port State:
NOTE
On 10 Gbps ports, the Media Primary column displays NONE when no module is installed, and SR, LR, or ER
depending on the module installed when there is one present.
The following sample command displays the port configuration statistics for slot 2, port 2:
show ports 2:2 configuration
Following is sample output from this command:
Port Configuration
Port
Virtual
Port
router
State State Neg
================================================================================
2:2
VR-Default
================================================================================
Link Status: A-Active R-Ready
Port State:
The
show ports information
more detailed information on specific ports. The output from the command differs very slightly
depending on the platform you are using.
The following sample output is from the
configuration for all ports:
QB_Mariner.4 > show port 3:1 info
Port
Diag
================================================================================
3:1
P
Em------e--
================================================================================
Flags : a - Load Sharing Algorithm address-based, D - Port Disabled,
e - Extreme Discovery Protocol Enabled, E - Port Enabled,
f - Flooding Enabled, g - Egress TOS Enabled, j - Jumbo Frame Enabled,
l - Load Sharing Enabled, m - MACLearning Enabled,
n - Ingress TOS Enabled, o - Dot1p Replacement Enabled,
P - Software redundant port(Primary),
q - Background QOS Monitoring Enabled, R - Software redundant port(Redunda
nt),
s - diffserv Replacement Enabled, r - Load Sharing Algorithm round-robin
v - Vman Enabled
ExtremeWare XOS 11.1 Concepts Guide
E
R
ON
AUTO
E
R
ON
AUTO
E
R
ON
AUTO
D-Disabled E-Enabled
Link
Auto
Speed
Cfg Actual Cfg Actual Cntrl Master Primary
E
R
ON
AUTO
D-Disabled E-Enabled
command shows you either summary information on all the ports, or
show ports information
Flags
Link
Link Num Num
State
UPS
ready
0
AUTO
AUTO
AUTO
Duplex
Flow
AUTO
command and displays the port
Num
Jumbo QOS
STP VLAN Proto
Size
0
1
1
9216
UTP
UTP
UTP
Load
Media
UTP
Load
profile Master
100