Extreme Networks ExtremeWare XOS Guide Manual page 218

Quality of Service
IQP8
Ingress IPTOS:
Egress IPTOS:
Egress 802.1p:
Smart Redundancy:
VLANs monitored for stats:
Software redundant port:
jitter-tolerance:
Following is sample output of this command for a BlackDiamond 10K switch 1 Gbps port:
Port: 2:1
Virtual-router: VR-Default
Type:
Random Early drop:
Admin state:
Link State:
Link Counter: Up
VLAN cfg:
Name: Default, Internal Tag = 1, MAC-limit = No-limit
STP cfg:
s0(disable), Tag=(none), Mode=802.1D, State=FORWARDING
Protocol:
Name: Default
Trunking:
EDP:
DLCS:
lbDetect:
Learning:
Flooding:
Jumbo:
BG QoS monitor: Unsupported
QoS Profile:
Queue: Qp1
Qp2
Qp3
Qp4
Qp5
Qp6
Qp7
Qp8
Ingress Rate Shaping :
IQP1
IQP2
Ingress IPTOS:
Egress IPTOS:
Egress 802.1p:
Smart Redundancy:
VLANs monitored for stats:
Software redundant port:
jitter-tolerance:
ExtremeWare XOS 11.1 Concepts Guide
MinBw= 0% MaxBw=100% Pri=8
Disabled
Replacement disabled
Replacement disabled
Unsupported
Unsupported
Unsupported
Unsupported
SX
Disabled
Enabled with auto-speed sensing
Ready
0 time(s)
Protocol: ANY
Load sharing is not enabled.
Enabled
Unsupported
Unsupported
Enabled
Enabled
Disabled
None configured
MinBw=0% MaxBw=100% Pri=1
MinBw=0% MaxBw=100% Pri=2
MinBw=0% MaxBw=100% Pri=3
MinBw=0% MaxBw=100% Pri=4
MinBw=0% MaxBw=100% Pri=5
MinBw=0% MaxBw=100% Pri=6
MinBw=0% MaxBw=100% Pri=7
MinBw=0% MaxBw=100% Pri=8
support IQP1-2
MinBw= 0% MaxBw=100% Pri=1
MinBw= 0% MaxBw=100% Pri=2
Disabled
Replacement disabled
Replacement disabled
Unsupported
Unsupported
Unsupported
Unsupported
Unsupported
auto-duplex
Match all protocols.
Unsupported
218