Displaying Network Login Settings; Disabling Network Login; Additional Configuration Details - Extreme Networks ExtremeWare XOS Guide Manual

Concepts guide
Hide thumbs Also See for ExtremeWare XOS Guide:
Table of Contents

Advertisement

Security
The URL to be redirected to (optional)
The URL description (optional)
The port is moved to the permanent VLAN.
You can verify this using the
command, see
"Displaying VLAN Settings" on page
After a successful login has been achieved, there are several ways that a port can return to a non-
authenticated, non-forwarding state:
The user successfully logs out using the logout web browser window.
The link from the user to the switch's port is lost.
There is no activity on the port for 20 minutes.
An administrator changes the port state.
NOTE
Because network login is sensitive to state changes during the authentication process, Extreme Networks
recommends that you do not log out until the login process is complete. The login process is complete when you
receive a permanent address.

Displaying Network Login Settings

To display the network login settings, use the following command:
show netlogin {port <portlist> vlan <vlan name>} {dot1x {detail}} {mac} {web-based}

Disabling Network Login

Network login must be disabled on a port before you can delete a VLAN that contains that port. To
disable network login, use the following command:
disable netlogin ports <portlist> [{dot1x} {mac} {web-based}]

Additional Configuration Details

This section discussed additional configuration like switch DNS name, default redirect page, session
refresh and logout-privilege. URL redirection requires the switch to be assigned a DNS name. The
default name is
network-access.net
name in unauthenticated mode is resolved by the DNS server on the switch in terms of the interface (to
which the network login port is connected to) IP-address.
To configure the network login base URL, use the following command:
configure netlogin base-url <url>
Where <url> is the DNS name of the switch. For example,
t makes the switch send DNS responses back to the netlogin clients when a DNS query is
access.ne
made for
network-access.net
ExtremeWare XOS 11.1 Concepts Guide
command. For more information on the
show vlan
. Any DNS query coming to the switch to resolve switch DNS
.
162.
configure netlogin base-url network-
show vlan
236

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.1

Table of Contents