Extreme Networks ExtremeWare XOS Guide Manual page 224

Quality of Service
To display the parameters for rate shaping (the values for the IQPs), use the following commands:
show qosprofile {ingress | egress} {ports [ all | <port_list>]}
show ports {<port_list>} information {detail}
Additionally, you can monitor the performance on the BlackDiamond 10K switch by using the following
command:
show ports <port_list> qosmonitor {ingress | egress}
NOTE
You must specify ingress to view ingress rate shaping performance.
224
ExtremeWare XOS 11.1 Concepts Guide