3 Enable PIM on all IP multicast routing interfaces using the following command:
configure pim add vlan [<vlan_name> | all] {dense | sparse} {passive}
4 Enable PIM on the router using the following command:
enable pim
Configuration Examples
Figure 65
and
Figure 66
are used in
configuration on a switch. See
PIM-DM Configuration Example
In
Figure
65, the system labeled IR 1 is configured for IP multicast routing, using PIM-DM.
Figure 65: IP multicast routing using PIM-DM configuration example
Area 0
IR 2
Headquarters
ABR 2
160.26.25.1
Virtual link
160.26.25.2
Area 5
ExtremeWare XOS 11.1 Concepts Guide
Chapter 20
to describe the Open Shortest Path First (OSPF)
Chapter 20
for more information about configuring OSPF.
10.0.1.1
10.0.3.2
ABR 1
10.0.3.1
160.26.26.1
160.26.26.2
Chicago
IR 1
10.0.1.2
10.0.2.2
10.0.2.1
161.48.2.2
Los Angeles
161.48.2.1
Area 6 (stub)
Configuration Examples
EX_040
413