Displaying Stp Settings - Extreme Networks ExtremeWare XOS Guide Manual

configure vlan sales add ports 1:1,2:1 tagged
configure vlan personnel add ports 1:1,2:1 tagged
configure vlan marketing add ports 1:1,2:1 tagged
configure stpd stpd1 add vlan sales ports all
configure stpd stpd1 add vlan personnel ports all
configure stpd stpd1 add vlan marketing ports all
configure stpd stpd1 ports link-type point-to-point 1:1,2:1
configure stpd stpd1 tag 100
enable stpd stpd1

Displaying STP Settings

To display STP settings, use the following command:
show stpd {<stpd_name> | detail}
This command displays the following information:
STPD name
●
STPD state
●
STPD mode of operation
●
Rapid Root Failover
●
Tag
●
Ports
●
Active VLANs
●
Bridge Priority
●
Bridge ID
●
Designated root
●
STPD configuration information
●
To display the STP state of a port, use the following command:
show stpd <stpd_name> ports {[detail | <port_list> {detail}]}
This command displays the following information:
STPD port configuration
●
STPD port mode of operation
●
STPD path cost
●
STPD priority
●
STPD state (root bridge, and so on)
●
Port role (root bridge, edge port, and so on)
●
STPD port state (forwarding, blocking, and so on)
●
Configured port link type
●
Operational port link type
●
ExtremeWare XOS 11.1 Concepts Guide
Displaying STP Settings
323