I/O Configuration Page; Input Configuration - Extron electronics ISM 482 User Manual

I/O Configuration Page

You can set up the input configurations and the output format on the I/O
Configuration page (figure 6-7). Access the Setup page by clicking the I/O Config
tab.
Figure 6-7 — I/O Configuration page

Input configuration

You can specify the format of each input. The available formats are RGB, RGBcvS
(identified as RGBcS in the drop-down box), YUVi, YUVp, Betacam 50, Betacam 60,
HDTV, S-video, and composite video. Specify the input format as follows:
1. Click in the desired input's Configuration field. A drop-down box appears
(figure 6-8).
Figure 6-8 — Input configuration drop box
Click the desired input format.
2.
Click the Submit button.
3.
Integration Scaling Matrix Switcher • Ethernet Operation 6-9