Erase Presets Submenu; Exit Menu - Extron electronics ISM 482 User Manual

User presets are recalled using the Input buttons. See "Recalling a user preset",
earlier in this chapter, for instructions on recalling a user preset.
Erase Preset submenu
Select the output with the settings that you want to erase by pressing the desired
Output button.
Rotate either the Adjust or the Adjust
active to highlight (< >) one of three memory presets to erase or highlight N/A for
no preset. Press the Next button to erase the preset. Highlight N/A and press the
Next button to exit without erasing the settings.

Exit menu

From the Exit menu (figure 3-12), press the Next button to return to the default
display cycle, or press the Menu button to return to the Video & Audio
Configuration menu
User Presets
Menu
Exit Menu
Next
Press Next to Exit
Menu
Video & Audio
Configuration
Figure 3-12 — Exit menu flowchart
knob while the Erase Presets submenu is
Default
Cycle
Integration Scaling Matrix Switcher • Operation 3-15