Selecting An Input; Recalling A User Preset; Auto Imaging An Input; Black/Mute Button And Leds - Extron electronics ISM 482 User Manual

Operation, cont'd

Selecting an input

4

Recalling a user preset

Figure 3-5 — Recalling user presets

Auto imaging an input

Black/Mute button and LEDs

5

Picture adjustment buttons

6
3-4 Integration Scaling Matrix Switcher • Operation
Input selection buttons — The Input 1 through Input 8 buttons select the
associated input to scale and display on the selected output(s).
Input selection LEDs — The green input LEDs above the input buttons
indicate the video selection. The red input LEDs below the input buttons
indicate the audio selection. To view the input tied to the unselected output,
press the unselected output button. Both outputs' input selections can also be
viewed in the LCD display cycle.
There are three user presets per input. The presets save color, tint, contrast,
brightness, detail, sizing, and centering settings. See "User Presets menu"
later in this chapter to save and erase presets. Cycle through and recall these
memories by repeatedly pressing the appropriate input button. The LCD
panel identifies the recalled preset (figure 3-5).
Press button
3
User Preset #2 User Preset #3
Recalled Recalled
The auto imaging feature automatically sizes and centers the selected input to
fill the screen. Initiate the auto imaging feature for a specific input by
pressing and holding the appropriate input button until the LCD displays the
message Auto Image Input #n, releasing the input button, and then pressing
and releasing the input button again. The LCD displays AutoSizing and
Centering Please Wait... until the operation is complete.
Alternatively, using the menu system, you can set this feature to apply the
Auto Image adjustments to every input as it is selected (see "Auto Imaging
and Auto Memories submenu", later in this chapter).
Black/Mute button and LEDs — The Black/Mute button switches the
selected output(s) to a black screen and/or muted audio. The black screen
and/or mute audio is deselected when a new input is selected.
The picture adjustment buttons select individual image adjustments that are
adjusted using the Adjust
buttons light when the button is pressed. See "Picture adjustments" later in
this chapter.
Color/Tint control button — The Color/Tint button selects the display color
and tint adjustments. The color adjustment range is from 0 to 127. The tint
adjustment range is from 0 to 255.
The Color/Tint control affects only composite video and S-video inputs.
Press button Press button
3 3
User Preset #1
Recalled
and Adjust knobs ( ). The LEDs above these
9
3
User Preset #2
Recalled