Control Software For Windows; Installing The Software - Extron electronics ISM 482 User Manual

Switcher Software

Control Software for Windows

The Windows-based Extron ISSISM Control Program communicates with the
switcher via the Ethernet LAN port or the rear panel Remote RS-232/RS-422 port to
provide an easy way to set up and operate the switcher. The program is compatible
with Windows 2000 and Windows XP. Updates to these programs can be
downloaded from the Extron Web site (http://www.extron.com).

Installing the software

The program is contained on the Extron Software Products CD-ROM. Install the
software as follows:
1.
Figure 5-1 — Software CD window
2.
3.
Figure 5-2 — Software installation
5-2 Integration Scaling Matrix Switcher • Switcher Software
Insert the CD-ROM into the drive. The installation program should start
automatically. If it does not self-start, run Launch.exe from the CD.
The Extron software CD window appears (figure 5-1).
Click the Software tab (figure 5-1).
Scroll to the desired program and click Install (figure 5-2).
®