Emptying The Hole Punch Waste Container - Xerox WorkCentre 7800 series User Manual
Workcentre 7800 series
Hide thumbs
Also See for WorkCentre 7800 series:
- Administrator's manual (284 pages) ,
- System administrator manual (258 pages) ,
- Quick reference manual (14 pages)
Table of Contents
Advertisement
Maintenance
Emptying the Hole Punch Waste Container
This section includes:
•
Emptying the Hole Punch Waste Container in the Office Finisher LX ......................................................... 200
•
Emptying the Hole Punch Waste Container in the Professional Finisher .................................................. 201
A message appears on the control panel when the hole punch waste container is full.
Emptying the Hole Punch Waste Container in the Office Finisher LX
WARNING:
Do not perform this procedure while the printer is copying or printing.
1.
Lift the finisher transport top cover, then open the front transport cover.
2.
Pull out the hole punch waste container.
3.
Empty the container.
200
WorkCentre 7800 Series Multifunction Printer
User Guide
- Quick Links:
- Turning Printer On/Off
- Initial Printer Setup
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
