Transmission Defaults - Xerox ColorQube 9303 User Manual

Ring Volume
This setting enables the user to hear a ringing tone from the device when an incoming fax is being
received.
• Enabled instructs the device to sound the tone when a fax is received. Select High, Medium or
Low.
• Disabled deactivates the tone.
Secure Receive
If this option is enabled, a 4 digit passcode is requested. The passcode is then required in order to print
any incoming fax.
• Enable activates Secure Receive, enter a 4-digit passcode to be used to release incoming fax jobs
for printing.
• Disable enables all incoming faxes to print without the passcode.
Default Output Options
If your device is fitted with a finisher you are able to staple, 2 hole punch or 2 side your incoming faxes.
This utility is used to specify the output options you require for all your incoming faxes.
• Staple staples all incoming fax output if enabled.
• Hole Punch prints all incoming faxes on 2 hole punched media if enabled.
• 2-Sided prints all incoming faxes 2-sided if enabled.

Transmission Defaults

Use these options to set the fax sending
defaults.
Automatic Redial Setup
If the device cannot make contact with the
destination fax machine, it automatically
waits and redials later. Use this setting to
specify the interval between unsuccessful
attempts and the number of times the
device redials.
• Redial Time Interval is used to
specify the time interval between redials for a failed transmission. Between 1 and 25 minutes can
be entered.
• Automatic Redial Attempts instructs the device how many times to redial the remote fax
machine before rejecting the job. Between 0 and 14 attempts can be entered.
Service Settings
ColorQube™ 9301/9302/9303
Administration and Accounting
291