Transparency Separators; Page Layout - Xerox ColorQube 9303 User Manual

Transparency Separators

Use Transparency Separators to interleave each printed transparency with a blank sheet of paper from
a specified paper tray.
1. Load the transparencies into Tray 4
(Bypass), update the Paper Settings
screen and Confirm your selections.
Refer to the Paper and Media
for loading instructions.
Note Transparency Separators is not
available if Auto Paper is selected.
Select the Output Format tab, then
2.
Transparency Separators and select
On.
3. Select the paper tray containing the
paper for the separators.
4. Select the tray that contains the
transparencies.
5. Select Save to confirm the selections
and run the job.

Page Layout

The Page Layout feature is ideal for handouts, story boards or for archival purposes. It allows up to 36
images to fit onto one sheet of paper. Your device will reduce or enlarge the images as needed, to
display them either in landscape or portrait orientation on one page, based on the paper supply
selected. The options are:
• Pages per Slide individual images reduced to fit onto one sheet of
paper.
• Repeat Image multiple copies of the same image reduced to fit onto
one sheet of paper. The actual number of rows and columns available
is limited by the minimum reduction value (25%) and your selected
paper output.
Note Some features cannot be used with the Page Layout feature and will be grayed out on the
Touch Screen.
guide
Output Format
ColorQube™ 9301/9302/9303 39
Copy