Chapter Starts - Xerox ColorQube 9303 User Manual

Chapter Starts

Use the following instructions to program Chapter Starts:
1. On the Copy tab, select the paper you
want to use the job.
Note Special Pages is not available if
Auto Paper is selected.
2. Select the Output Format tab,
Special Pages button and then
Chapter Starts.
3. Select the Chapter Starts button.
Select the Page Number box and use
4.
the numeric keypad to enter a page
number for the chapter start.
5. Select either On Right Page to print
on Side 1, or On Left Page to print on
Side 2.
6. Select the Add button to confirm your
selections and add the programed
Chapter Start to the list on the right.
Add further Chapter Starts as
required.
7. Select Close to return to the Special Pages screen.
A list of the selected Special Pages is displayed on the screen. To make changes, select the item in
the list you wish to change and use Edit. Use Delete or Delete All to delete unwanted entries.
Select Close Menu to exit from the drop-down menu.
8. Select Save to confirm your selections and run the job.
Output Format
ColorQube™ 9301/9302/9303 31
Copy