Log In / Out - Xerox ColorQube 9303 User Manual

Hide thumbs Also See for ColorQube 9303:
Table of Contents

Advertisement

Log In / Out

Log In / Out

If Authentication or Accounting has been enabled on the device, you may need to log in before using
some or all of the services. A picture of a lock on a button indicates that you must log in to use that
service.
1.
To log in select the Log In/Out button
on the control panel. Selecting a
locked service will also prompt you to
enter a log in name and password.
2.
Use the keyboard to enter your User
Name, then select the Next button.
3.
Use the keyboard to enter your
Password, then select the Enter
button.
4.
If an accounting system is in use on
the device, you may also need to
enter additional information.
If Xerox Standard Accounting is
enabled, the user will also have
to log in using their Xerox
Standard Accounting details.
If Network Accounting is enabled, the user must enter a User ID and an Account ID.
If a Foreign Device Interface (FDI) is installed, you are prompted to access via the device
installed, for example a card reader or coin slot.
Your user details display in the User
Details area on the right side of the
message display.
5.
To log out, select the Log In/Out
button again or select the User
Details area and select Log Out from
the drop-down menu.
6.
A confirmation screen is displayed,
select Log Out or Cancel.
110
ColorQube™ 9301/9302/9303
Internet Fax

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorqube 9301Colorqube 9302

Table of Contents