Supplies - Xerox ColorQube 9303 User Manual

Device Settings
Output Location
This option determines the output location
for non-finished jobs. The output location
for finished jobs is determined by the
system.
System generated reports are sent to the
Top Tray automatically.
The following options are available for
Copy, Print and Fax jobs:
• Top Tray delivers the output to the
Top tray.
• Stacker Tray delivers the specified job output to the Stacker Tray.
Within Job Offsetting
The device offsets every set from the previous set, making it easier to separate the sets. There maybe
occasions when you require the job to stack without offsetting. Use this feature to enable or disable
the offsetting.
• Enable instructs the device to offset each printed set.
Disable instructs the device to stack the sets without offsetting.
•
Staple Productivity
Productivity can be improved by stapling long edge feed (LEF) documents in the top right corner.
• Enable instructs the device to staple LEF documents in the top right corner.
• Disable instructs the device to staple LEF documents in the top left corner.

Supplies

Select the Supplies option to access the
following settings:
• Enter PagePack Passcode
page 281
• Low Supply Warning
• Supply Counter Reset
280 ColorQube™ 9301/9302/9303
Administration and Accounting
on
on page 281
on page 281