Power Options
Power Options
Power On
•
Press the Power On/Off button. The
device begins the power on
procedure.
•
Some functions will be ready before
others. The device will be ready to
scan in approximately 3 minutes.
Power Off
•
Press the Power On/Off button. A
confirmation screen will appear.
•
Select Power Down to commence the power down cycle. If power down is no longer required,
select Cancel to return to the previous screen.
If power down is selected, the device remains on for approximately 30 seconds before the power is
terminated. Any jobs in the job list will be deleted. Ensure you wait at least 30 seconds before
powering on again.
•
If Cancel is selected the power down option will be cancelled and the device will be available for
use.
Note
It is recommended the device is only powered off if a problem occurs or if it is being moved.
Use the power save function to conserve energy during periods of inactivity. If the device is being
moved, allow the device to cool down for 30 minutes before moving it.
WARNING:
Use only the ON/OFF switch to reboot your device. Damage may occur to your device
if power is removed by other means.
Energy Save and Quick Restart
The Energy Save button on the control panel can be used for additional power functions.
•
Select the Energy Save button.
•
If Energy Saver is selected, the device
will immediately enter the Power
Saver Mode appropriate to its
configuration. If there are any jobs in
the job list, a second screen is
displayed.
To re-activate the device when in this
mode, touch a button on the touch
screen or control panel.
308
ColorQube™ 9301/9302/9303
General Care and Troubleshooting