Xerox ColorQube 9303 User Manual page 28

Output Format
To create a booklet:
1. Select Booklet Creation and On.
Note Booklet Creation is not available if Auto Paper is selected. Select an alternative Paper
Supply option.
Select the Paper Supply button and
2.
select the tray that contains the paper
you want to use.
If using the High Volume Finisher with
Booklet Maker to fold and staple your
output, a Short Edge Feed (SEF) Paper
Supply must be selected.
3. From the Original Input drop-down
menu, select either 1 Sided Originals
or 2 Sided Originals according to the
originals you are using.
4. If available, select either Fold or Fold
and Staple as required and select
Save to confirm your selections.
5. Load your originals into the document
feeder.
6. Use the Original Orientation option
on the Layout Adjustment tab to
select the correct feed and image
orientation for the originals. Refer to
Original Orientation
7. Select Save to confirm your selections
and run the job.
Note The default reading order of
your booklet will be from the left page
to the right page. If a different
reading order is required, the System
Administrator can use Tools to display a reading order option. Refer to the
Accounting guide for more information.
28 ColorQube™ 9301/9302/9303
Copy
on page 22.
Administration and